Polyester Playground Slides
Polyester playground slides from Intergard are designed for use with compatible play structures in schools, nurseries, communal play areas and playgrounds, depending on the individual model and its intended application. Made from glass-fibre reinforced polyester (GRP), these slides provide a rigid construction and are available in different sizes to suit a range of platform heights.
Our polyester slides are available in red, yellow, green and blue, allowing the slide to complement an existing play structure or become a contrasting feature within a new playground design. The exact combination of size and colour should always be checked for the individual model.
For schools, public playgrounds and other communal settings, choose only a slide specifically designed and certified for the intended application. Platform height, dimensions, fixing method, safety areas and appropriate surfacing should also be considered when planning the installation.
Explore our polyester playground slides below and select the size and colour that best suit your project.
Polyester slides for playground equipment
A polyester playground slide is a rigid slide made from glass-fibre reinforced polyester and designed to be attached to a compatible play structure. Depending on the model, these slides can be used for schools, nurseries, communal play areas and playgrounds.
Intergard polyester slides are available in different sizes and in red, yellow, green and blue. When selecting a slide, consider the required platform height, dimensions, fixing method, intended use and, where applicable, the certification required for the installation.
What is a glass-fibre reinforced polyester slide?
Glass-fibre reinforced polyester, commonly known as GRP, is a composite material combining polyester resin with glass-fibre reinforcement. This combination makes it possible to produce a rigid structure with the shape and surface required for a playground slide.
You may also encounter terms such as fibreglass slide or glass-fibre reinforced plastic when comparing playground equipment. For this category, polyester slide and GRP slide describe the most relevant material and product type.
Why choose a polyester playground slide?
Glass-fibre reinforced polyester can be formed into rigid playground slides in different sizes, shapes and colours. It provides an alternative to HDPE and stainless steel slides when selecting equipment for a play structure.
Key characteristics of our polyester slides include:
- Glass-fibre reinforced polyester (GRP) construction
- Rigid slide construction
- Different sizes depending on the model
- Available in red, yellow, green and blue
- Models with raised sides around the entrance section
- Designed for installation on compatible play structures
- Different applications depending on the individual model and its certification
Red, yellow, green and blue polyester slides
Intergard polyester slides are available in red, yellow, green and blue. Having several colours available makes it easier to coordinate a slide with an existing play structure or create a contrasting colour combination within a new playground.
A red slide provides a traditional playground appearance, while yellow, green and blue provide alternative combinations with timber structures, posts, panels and other playground components.
The availability of a particular colour may depend on the slide model and size. Check the individual product specifications when you require a specific combination of dimensions and colour.
Which colour playground slide should I choose?
The choice between red, yellow, green and blue is primarily a matter of playground design and personal preference. A slide can be coordinated with the other components of the play structure or selected in a contrasting colour to make it a more prominent visual feature.
For larger playground projects, using a consistent colour scheme can also help create a recognisable appearance across several pieces of play equipment.
Polyester slides with raised entrance sides
The relevant models feature raised sides around the upper entrance section of the slide. These sides form part of the transition between the platform and the sliding surface.
The entrance design is only one aspect of the complete installation. The supporting structure, platform height, fixings, required clearances and surfacing must also be suitable for the intended application.
Which size polyester slide do I need?
Choose the slide size according to the platform height for which the individual model has been designed. Slide length should therefore not be selected solely according to the available space or preferred appearance.
Before ordering, check:
- Compatible platform height
- Slide length
- Slide width
- Available installation space
- Fixing method
- Required colour
- Intended type of use
- Any certification required for the application
What platform height do I need for a polyester slide?
The platform height must match the specifications of the selected slide. A slide designed for a particular starting height should not be installed on an arbitrarily higher or lower platform.
Platform height affects the geometry and angle of the installed slide. Always check the technical specifications and installation instructions for the individual model before installation.
Polyester slides for schools
A polyester slide can be suitable for a school when the individual model is specifically intended for that application. Equipment used in a school or other communal setting should be selected according to its actual use and the requirements applying to the complete installation.
The supporting structure, fixings, access points, free spaces, fall areas and appropriate surfacing should all be considered when planning the playground.
Polyester slides for nurseries and communal play areas
For nurseries and communal play areas, choose a slide that is specifically suitable for the intended environment. The fact that a slide is manufactured from GRP does not by itself determine whether it is suitable for communal or public use.
Check the technical information for the model, including the required platform height and any applicable certification.
Polyester slides for public playgrounds
For a public playground, choose only a polyester slide specifically designed and certified for public use. Material, size or colour alone cannot establish whether a slide is suitable for a public playground.
You can also explore our complete range of playsets and playground equipment.
EN 1176 and polyester playground slides
EN 1176 compliance should be checked for each individual slide intended for a public playground. It should not be assumed simply because a product is made from glass-fibre reinforced polyester or appears within a professional playground category.
Where a slide is stated to comply with or be certified to EN 1176, this information applies to the specified product and the conditions associated with that certification.
Does an EN 1176 slide make the entire playground compliant?
No. Compliance or certification of an individual slide does not automatically make the complete playground installation compliant. The supporting structure, access, fixings, foundations, safety areas and surfacing must also meet the applicable requirements.
For public playground projects, the complete installation should therefore be considered rather than the slide in isolation.
What surfacing is required under a polyester slide?
The required playground surfacing depends on the installation and the applicable critical fall height. There is no single rubber tile thickness or other impact-attenuating surface that is suitable for every slide.
Where impact-attenuating surfacing is required, its certified performance should correspond to the critical fall height of the installed play equipment.
How do you install a polyester playground slide?
A polyester slide should be installed on a compatible supporting structure in accordance with the instructions for the individual model. Always check the required platform height before starting the installation.
- Determine the intended use. Establish whether the slide is for a school, nursery, communal area, public playground or another application.
- Choose the model and colour. Select the required size and choose from red, yellow, green or blue where available.
- Check the platform height. It must correspond to the specifications of the slide.
- Check the supporting structure. The structure must be suitable for the selected model.
- Follow the fixing instructions. Use the fixing method specified for the product.
- Allow sufficient space. Consider access, the run-out area and any required safety areas.
- Select appropriate surfacing. Where required, ensure its impact attenuation is appropriate for the installation.
- Inspect the completed installation. Check the structure and fixings before the equipment is put into use.
How do you maintain a polyester slide?
A polyester playground slide should be inspected regularly for wear, damage and loose fixings. Pay particular attention to the sliding surface, sides, entrance section, run-out area and fixing points.
When cleaning the slide, use a method suitable for its surface finish. Avoid abrasive products or tools that could unnecessarily damage the surface.
Will the colour of a polyester slide change outdoors?
The appearance of an outdoor slide can change over time as a result of use and exposure to outdoor conditions. The rate and extent of any change depend on factors such as exposure and the characteristics of the individual product.
A colour should therefore not be described as permanently fade-resistant unless this property is specifically confirmed for the selected model.
Polyester slide or HDPE slide?
Glass-fibre reinforced polyester is a rigid composite material, whereas HDPE is a thermoplastic. HDPE slides are commonly used with private garden play equipment, while certain polyester slides are intended for more intensive or professional applications.
Material alone, however, does not determine whether a slide is suitable for public use. The intended application and product-specific certification remain important.
Polyester slide or stainless steel slide?
A polyester slide uses a glass-fibre reinforced composite material, whereas a stainless steel slide uses a metal construction. Both types can be available for professional playground applications when the individual model is specifically designed and certified for that use.
To compare the alternatives, view our playground slides.
Buy polyester playground slides from Intergard
Choose your polyester slide according to its intended application, platform height, dimensions and preferred colour. With red, yellow, green and blue options available, the slide can be coordinated with the design of your play structure and playground project.
To compare different materials and types, view our complete range of slides.
Polyester playground slides for trade and larger projects
Do you require several polyester slides for a school, playground project, public organisation or resale? Provide the required sizes, colours, quantities, intended application and delivery address so that an appropriate quotation can be prepared.
Frequently asked questions about polyester slides
What is a polyester playground slide?
A polyester playground slide is made from glass-fibre reinforced polyester, commonly abbreviated to GRP. This composite material is used to create a rigid slide construction.
Which colours are polyester slides available in?
Intergard polyester slides are available in red, yellow, green and blue. The exact colour availability may depend on the model and size selected.
Which colour playground slide should I choose?
The choice between red, yellow, green and blue is mainly a matter of playground design and personal preference. Choose a colour that complements the play structure or use a contrasting colour to create a more prominent feature.
Are polyester slides suitable for public playgrounds?
They can be, provided that the individual model is specifically designed and certified for public playground use. Being made from polyester does not by itself make a slide suitable for a public installation.
Are all polyester slides EN 1176 compliant?
No. EN 1176 compliance or certification must be checked for the individual model. It should not be assumed from the material or product category alone.
What platform height is required for a polyester slide?
The required platform height depends on the individual slide model. Install the slide only at a starting height that corresponds to its technical specifications.
Can a polyester slide be fitted to a wooden play structure?
Yes, provided that the structure, platform height and fixing system are compatible with the selected slide. Always follow the installation instructions for the model.
What is the difference between a polyester slide and an HDPE slide?
Glass-fibre reinforced polyester is a rigid composite material, whereas HDPE is a thermoplastic. The most suitable option depends on the design, dimensions and intended use of the individual model.
What is the difference between a polyester slide and a stainless steel slide?
A polyester slide uses a glass-fibre reinforced composite, whereas a stainless steel slide uses metal. Both can be suitable for professional applications when the individual product is designed for that purpose.
What safety surfacing is required under a polyester slide?
The required surfacing depends on the installation and the applicable critical fall height. Where impact-attenuating surfacing is required, its certified performance should be suitable for the installed equipment.
How should a polyester slide be maintained?
Inspect the slide regularly for surface damage, wear and loose fixings and clean it using a method suitable for its finish. Avoid abrasive cleaning products and tools that could damage the surface.